Table of Contents
Advertisement
Menu Item
Base I/O Address
Interrupt
DMA Channel
Audio
Hardware Monitor
Legacy USB Support
IDE Configuration
IDE Controller
Advanced Menu Items
Settings (default is bold) and Description
278, 378, 3BC, 228
An asterisk ('*') displayed next to an address
indicates a conflict with another device.
Only appears if Parallel Port is Enabled.
IRQ7, IRQ5
An asterisk ('*') displayed next to an interrupt
indicates a conflict with another device.
This option only appears if Parallel Port is set to
Enabled.
An interrupt set to IRQ5 in a multimedia system might
conflict with the audio subsystem settings.
DMA1, DMA3
DMA not displayed when Mode is Bi-directional
The DMA field is only displayed when the Parallel
Port field is set to Enabled, and the Mode field is set
to ECP.
Disabled, Enabled
Select Disabled if an audio board is installed.
Disabled, Enabled
Enables chassis intrusion monitoring.
Disabled, Enabled
Disabled, Primary, Secondary, Both
This field enables the primary, secondary, or both
interface connectors on the riser board.
Configuring the System 3-13
Advertisement
Table of Contents
