Table of Contents
Advertisement
Clean the monitor screen with a glass cleaner and wipe it with a clean,
!
lint-free cloth. You may use wet/dry cleaning pads manufactured for
monitor screens.
Moving or Shipping Your System
Use these steps to prepare your system for moving or shipping:
Back up the files on the hard drive to diskettes, Zip disks, or tape
1.
cartridges.
Be sure to take precautions for storing and transporting Zip disks,
diskettes, or tape cartridges so that they are not exposed to magnetic
fields or electrical impulses.
Remove any diskette from the diskette drive. If you have a CD in the
2.
CD-ROM drive, remove the CD.
3.
Turn off the system unit and any external options connected to it.
Unplug the system unit power cable from the wall outlet or surge
4.
suppressor, then from the unit itself.
Unplug any external options from the wall outlets or surge
5.
suppressor, and then disconnect them from the system unit.
6.
Pack the system components in the original shipping materials and
cartons. If these are not available, be sure to use adequate packing
materials to protect the components.
To set up your system, follow the steps on the PowerMate 8100 Series
Quick Setup poster that comes with the computer.
More Information
Once you have your system up and running, we suggest that you do the
following:
Install applications provided by NECC from the NEC Select Install
!
CD.
See "Setting Up a Healthy Work Environment" in Appendix A.
!
Install any of your own applications. See the documentation that
!
comes with the application.
2-8 Setting Up the System
Advertisement
Table of Contents
