Table of Contents
Advertisement
T Chassis intrusion notification
Whenever the chassis cover is removed, LANDesk Client Manager
logs the incident and then reports it onscreen the next time the system
is rebooted.
T Security slot
The security slot on the back of the minitower chassis accepts a
Kensington Security Standard connector or other locking device.
Secure the locking device to the security slot and to an immovable
object to protect your system from theft.
What is the difference between a Supervisor password and a
User password?
A Supervisor password allows access to the BIOS Setup utility for system
configuration. A User password allows system boot up only after a
password has been entered.
Once the Supervisor password feature is enabled, the BIOS Setup utility
can only be accessed by entering the password.
When both the User password and Supervisor password are enabled, only
the Supervisor password gives you complete access to all Setup fields.
How do I set a password?
See "Security Menu" in Chapter 3.
How do I use a password?
See "Security Menu" in Chapter 3.
What do I do if I forget my password?
If you forget the password, you must clear the password by setting a
jumper on the system board (see "Clearing a Password" in Chapter 3).
Once you clear the password, you can boot the system and set a new
password in Setup.
How can I protect the system from viruses?
Use appropriate virus detection software regularly to protect the system
from computer viruses.
C-10 Questions and Answers
Advertisement
Table of Contents
