NEC POWERMATE 8100 Manual page 45

This chapter provides information on configuring your computer. It
includes information about the BIOS Setup utility for configuring
hardware and the system, the Flash utility for BIOS updates, the NEC
Select Install CD for software reinstalls, the NEC Driver CD for installing
optional drivers, and jumper settings for physically configuring devices in
the system.
See the following table for a quick guide to the utilities, tools, or
procedures required in configuring the system. For detailed information
about these and other tools, see the sections following the table.
Configuration Tools and Utilities
The following table lists ways you can configure the system, and the
utility, tool, or procedure to use for the configuration.
Note
Also see the next chapter, "Managing System Resources," for
ways to manage system resources and to configure the system remotely.
Configuration Tools and Utilities
Configuration
add or remove hardware (hard drive,
diskette drive, CD-ROM drive, DVD-
ROM drive, tape backup)
base I/O address, changing
BIOS, updating
boot devices, determining
boot order, changing
configuring hardware
DIMM memory, checking
diskette drive, enabling
DMI log/DMI event log, setting,
configuring, viewing
3-2 Configuring the System
Method, Tool, or Utility
BIOS Setup (Advanced menu)
BIOS Setup (Advanced menu)
FLASH utility
BIOS Setup (Boot menu)
BIOS Setup (Boot menu)
BIOS Setup (Advanced menu)
Jumper Settings
BIOS Setup (Main menu)
BIOS Setup (Advanced menu)
BIOS Setup (Advanced menu)