Table of Contents
Advertisement
Removing the Minitower Cover
The following procedure describes how to remove the minitower cover.
the power and unplug the system power cable. Power is removed only
when the power cable is unplugged.
Note
If the cover is removed, LANDesk Client Manager logs the
intrusion and reports it in a screen message the next time the system is
booted. This message appears every time the system is rebooted until the
report is cleared. For more information on closing the notification window
and clearing the message, see "Using the Chassis Intrusion Notification
Feature" in Chapter 3.
Turn off and unplug the system unit.
1.
2.
Disconnect the keyboard, mouse, monitor, and any other external
options (such as a printer) from the rear of the system unit.
Label all cables to make reinstallation easier.
components. Discharge static electricity by touching a metal object before
removing the system unit cover.
3.
If you have a chassis lock that connects to the Kensington
Standard connector, remove it.
If you have a padlock in the locking tab on the rear edge if the
4.
chassis, remove it.
5.
Loosen the three thumbscrews at the rear of the system unit.
Before removing the system unit cover, turn off
Electrostatic discharge can damage computer
Installing Options 5-7
®
Security
Advertisement
Table of Contents
