Installing A 5 1/4-Inch Device - NEC POWERMATE 8100 Manual

Hide thumbs Also See for POWERMATE 8100:
Table of Contents

Advertisement

A – Pop-In Tabs
B – Locking Tabs (behind front
panel)
4.
Replace the system unit cover (see "System Unit Cover").

Installing a 5 1/4-Inch Device

Use the following procedure to install a 5 1/4-inch device into a 5 1/4-
inch accessible device slot:
Note
A 3 1/2-inch hard drive can also be installed in a 5 1/4-inch
accessible device slot. Place the device in a 5 1/4-inch frame adapter and
then follow the instructions in "Installing a 5 1/4-Inch Device."
1.
Follow the preinstallation instructions that come with your device,
such as setting jumpers and switches.
See "Preparing the Device" for device preparation information.
Remove the system unit cover (see "System Unit Cover").
2.
5-56 Installing Options
Replacing the front panel
C – Pop-In Tabs (behind front
panel)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate 8100 series

Table of Contents