Table of Contents
Advertisement
Replacing the Desktop Cover
Replace the desktop cover as follows.
tuck the cables out of the path of the cover.
Position the cover over the chassis with its front edge about one inch
1.
behind the front of the chassis.
Replacing the desktop cover
Lower the cover onto the chassis taking care to align the tabs on the
2.
sides of the cover with the inside unit frame.
3.
Slide the cover forward to meet the front panel.
Note
The cover fits tightly. If the cover does not slide off all the way to
the front panel, place one hand on the front of the unit while you slide the
cover forward from the rear.
4.
Secure the cover with the two thumbscrews. (See "Removing the
Desktop Cover," earlier in this chapter.)
Reconnect all external peripherals.
5.
Plug in the power cables.
6.
5-6 Installing Options
To prevent damage to system cables, carefully
Advertisement
Table of Contents
