Table of Contents
Advertisement
Some older software may not work in a Windows 95 or Windows 98
system configured for FAT 32.
In Windows NT 4.0 systems, the Partition Information screen does
not appear. Instead, the FAT16 Partition warning appears. This
screen is described in the following paragraph.
After you select the FAT type, a warning screen appears indicating
8.
that the system is about to partition and format your hard drive using
the FDISK program. This warning screen contains three options:
Back, Exit, and Continue.
Click Back to return to the Partition Information screen.
!
Click Exit to terminate the restore process.
!
Click Continue to perform FDISK.
!
If you click Continue, the system performs FDISK using the FAT
type selected and reboots the system. After the reboot, all partitions
are formatted. When all the partitions have been formatted, the OS
loads from the CD. The Installing Applications screen appears. This
screen displays the version of Windows OS being installed.
The other software components required for the operating system are
also loaded from the CD.
After the OS finishes loading, the "Operating System Restore
Completed" screen appears.
9.
Remove the CD from the CD tray.
Click OK to reboot.
10.
This completes the Custom Rebuild and Restore procedure.
To reinstall any of the applications or device drivers that came with the
computer, follow the procedures in "Installing Applications."
To install device drivers that did not come with your computer, follow the
procedures in "NEC Driver CD."
Restore the applications or drivers that were not provided by NEC by
using the vendor diskette(s) or CD-ROM(s) included in its original
packaging.
Configuring the System 3-35
Advertisement
Table of Contents
