Table of Contents
Advertisement
If you want to partition the hard drive, go to step 7. Otherwise, click
5.
Skip on the Partitioning the Hard Drive screen to retain the present
partition structure on the hard drive.
The Format Mode screen appears with four options: Back, Quick,
Full, and Exit.
Click Back to return to the Partition Information screen.
!
Click Quick to do a quick hard drive format.
!
Click Full to do a full hard drive format.
!
Click Exit to terminate the restore process.
!
6.
After you select the type of hard drive format you want to do (Quick
or Full), the Formatting Drive(s) screen appears with a status bar
showing the progress of the formatting.
After the drive has been reformatted, the Installing Applications
screen appears, indicating the status of the restore process as the
operating system loads from the CD. This screen also displays the
version of Windows OS being installed.
The other software components required for the operating system are
also loaded from the CD.
After the OS finishes loading, the "Operating System Restore
Completed" screen appears. Skip to step 9.
To partition the hard drive, click Continue on the Partitioning the
7.
Hard Drive screen. The Partition Information screen appears (in
Windows 95 or Windows 98 systems only; in Windows NT 4.0
systems, the FAT16 Partition warning appears as described later in
this procedure).
The Partition Information screen has three options and lets you select
the File Allocation Table (FAT) type you want to use for the
operating system restore:
Click Back to return to the Operating Mode screen.
!
Click FAT 16 to select the FAT16 allocation table (current FAT
!
type).
Click FAT 32 to select the FAT32 allocation table (available for
!
Windows 95 systems only).
3-34 Configuring the System
Advertisement
Table of Contents
