Table of Contents
Advertisement
3.
Remove the front panel.
Locate the device rails that ship with your system. Attach the rails to
4.
the sides of the device with the four screws that come with the
device.
Note
To order a rail kit, call the NECC Technical Support Center at 1-
800-632-4525 and order kit number OP-540-22401.
Attaching device rails
A – Device Rail
B – Locking Tab
From the front of the system, insert the device, connector end first,
5.
into the device slot.
Note
To easily access device connectors for cabling, do not insert a 5
1/4-inch device all the way into the slot.
C – Device
D – Locking Tab
Installing Options 5-57
Advertisement
Table of Contents
