Table of Contents
Advertisement
Menu Item
After Power Failure
Floppy Check
On Modem Ring
On LAN
On PME
Boot Menu Items
Settings (default is bold) and description
Power On, Stay Off, Last State
When After Power Failure is set to Power On, the
system powers on after a power failure. With the
Stay Off setting, the system does not power on after
a power failure. With the Last State setting the
system powers on only if it was powered on when
the power failure occurred.
If the field is set to Stay Off, the On LAN boot option
does not work, even if the On LAN field is set to
Enabled.
Disabled, Enabled
Power On, Stay Off
This option enables an external modem to work
even when the system is in a power reduction state.
Full power is restored to the system so it can receive
the modem ring when the setting is Power On.
Power On, Stay Off
This option enables the system to be contacted via a
LAN even when your system is in a power reduction
state. On LAN does not work if the After Power
Failure option is set to Stay Off.
Power On, Stay Off
This field controls how the system responds to a PCI
Power Management Enable (PME) wake up event.
Configuring the System 3-23
Advertisement
Table of Contents
