Table of Contents
Advertisement
Replacing the Stand
To replace the stand, use the following steps.
back in its stand before using the computer.
Place the system unit over the stand with its front edge about one-half
1.
inch behind the front of the stand. Align the tabs on the stand with the
slots on the floor of the chassis.
Aligning the system unit with the stand
Slide the system unit forward to lock the tabs in the slots.
2.
Replace the minitower cover (see "Replacing the Minitower Cover").
3.
5-14 Installing Options
To prevent tipping, always place the system unit
Advertisement
Table of Contents
