Panel Ports & Buttons; Turning On/Off Wifi - ZyXEL Communications LTE Series User Manual

Hide thumbs Also See for LTE Series:
Table of Contents

Advertisement

Table 5 LTE7461-M602 / LTE7480-M804 / LTE7480-S905 / LTE7490-M904 LED Descriptions
COLOR
Red
Green
Amber
1.5.2 Panel Ports & Buttons
The connection ports are located on the bottom/rear panels.
The following table describes the items on the bottom panel.
Table 6 Panel Ports and Buttons
LABEL
ANT1-ANT2
USB
LAN/
Ethernet
WiFi
WPS
Reset
POWER
Button
Power
Reboot
SIM card

1.5.3 Turning On/Off WiFi

Use the WPS or WiFi/WPS button on the Zyxel Device to turn on or turn off the wireless network.
Note: Use the WiFi function of the LTE7461-M602 / LTE7480-M804 / LTE7480-S905 / LTE7490-M904
for configuration (for example, connect to the LTE Ally app of your mobile device to
find the optimal LTE signal strength and manage your LTE7461-M602 / LTE7480-M804 /
LTE7480-S905 / LTE7490-M904).
Chapter 1 Introduction
STATUS
DESCRIPTION
Blinking
The Zyxel Device is booting or self-testing.
On
The Zyxel Device encountered an error.
Blinking
The Zyxel Device is trying to connect to the Internet.
On
The Zyxel Device is connected to the Internet.
Blinking
The Zyxel Device WiFi is on.
DESCRIPTION
Install the external antennas to strengthen the cellular signal.
The USB port of the Zyxel Device is used for file sharing.
Connect a computer via the PoE injector for configuration.
Connect the PoE injector to a power outlet to start the device.
Press the WLAN button for more than five seconds to enable the wireless function.
After the wireless function is enabled, press the WLAN button for more than one second but less
than five seconds to quickly set up a secure wireless connection between the device and a WPS-
compatible client.
Press the button for more than five seconds to return the Zyxel Device to the factory defaults.
Press the POWER button after the power adapter is connected to start the LTE3301-PLUS.
Connect the power adapter and press the POWER button to start the LTE3301-PLUS.
Press the RESET button for more than 2 seconds but less than 5 seconds, it will cause the system to
reboot.
Insert a micro-SIM card into the slot with the chip facing down and the beveled corner in the top
left corner.
LTE Series User's Guide
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents