Configure 802.1X And Wpa - ZyXEL Communications AMG1202-T10B Support Notes

Note: If there are more than one access point is needed be sure to make the
adjacent access point service area over lap one another. So the wireless
station is able to roam. For more information please refer to roaming at

4. Configure 802.1x and WPA

 What is the WPA Functionality?
 Configuration for Access Point
 Configuration for your PC
 What is WPA Functionality?
Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i security
specification draft. Key differences between WAP and WEP are user
authentication and improved data encryption. WAP applies IEEE 802.1x
Extensible Authentication Protocol (EAP) to authenticate wireless clients using
an external RADIUS database. You cannot use the AMG1302-T10B/
AMG1202-T10B's local user database for WPA authentication purpose since
the local user database uses MD5 EAP which can not to generate keys.
WPA improves data encryption by using Temporal Key Integrity Protocol
(TKIP), Message Integrity Check and IEEE 802.1x. Temporal Key Integrity
All contents copyright © 2013 ZyXEL Communications Corporation.
AMG1202-T10B/AMG1302-T10B
Support Notes
74