Patch Edit Screen - Roland SonicCell User Manual

■ Patch Edit screen ..........................................................................................................

The Patch Edit screen is organized as follows.
You can turn [CURSOR/VALUE] to the right or left to switch between screens.
Parameter
GENERAL
STRUCTURE
MATRIX CTRL (Control)
1/2/3/4
Tone
WG
WG
(Pitch Envelope)
TVF
TVF
(TVF Envelope)
TVA
TVA
(TVA Envelope)
OUT
(Output)
LFO 1/2
LFOS
(Step LFO)
TMT
(Tone Mix Table)
CTRL
(Control)
* If the Str Type (p. 93) is set to any value other than 1, two screens will be shown for WG–OUT.
Value Explanation
Edits overall settings for the entire patch.
Press [CURSOR/VALUE] to access the Patch General screen (p. 90).
Selects the combination of tones.
Press [CURSOR/VALUE] to access the Patch Structure screen (p. 93).
Specifies matrix control settings.
Press [CURSOR/VALUE] to access the Patch Mtrx Ctrl 1/2/3/4 screen (p. 95).
Selects either 1 & 2 or 3 & 4 as the combination of tones that will be shown in the
1&2, 3&4
screen.
Edits waveform-related settings.
Press [CURSOR/VALUE] to access the Patch WG screen (p. 98).
Edits pitch envelope settings.
By moving the cursor to
Patch Pitch Env screen (p. 101).
Edits TVF settings.
Press [CURSOR/VALUE] to access the Patch TVF screen (p. 102).
Edits TVF envelope settings.
By moving the cursor to
Patch TVF Env screen (p. 104).
Edits TVA settings.
Press [CURSOR/VALUE] to access the Patch TVA screen (p. 105).
Edits TVA envelope settings.
By moving the cursor to
Patch TVA Env screen (p. 107).
Edits settings for the patch/tone output.
Press [CURSOR/VALUE] to access the Patch Output screen (p. 108).
Edits LFO1,2 settings.
Press [CURSOR/VALUE] to access the Patch LFO 1/2 screen (p. 109).
Edits step LFO settings.
Press [CURSOR/VALUE] to access the Patch Step LFO screen (p. 112).
Specifies how the tones will be heard.
Press [CURSOR/VALUE] to access the Patch TMT screen (p. 112).
Edits controller-related settings.
Press [CURSOR/VALUE] to access the Patch Ctrl screen (p. 114).
Using the SonicCell in Patch Mode
and pressing [CURSOR/VALUE] you can move to the
and pressing [CURSOR/VALUE] you can move to the
and pressing [CURSOR/VALUE] you can move to the
89