Inputting Sound From An External Device (Input); Basic Operation - Roland SonicCell User Manual

Inputting sound from an external device (INPUT)

Basic operation

1. Press [INPUT] so its indicator is lit.
The Input screen will appear.
fig.disp-Input-top01
2. Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
3. Press [CURSOR/VALUE] to highlight the value.
Parameter
Phantom Power
Assign
142
Value Explanation
Turns phantom power on/off.
Turn this "ON" if you've connected a phantom-powered condenser mic to
the MIC INPUT jack.
• You must turn phantom power "OFF" unless a condenser mic that
OFF, ON
• Before you switch phantom power on/off, you must turn the front panel
• When you turn the power on, the phantom power will always be OFF.
Specifies where the input signal is to be sent.
To COM+ Output:
To COM+Output,
To COM, To Input FX
To COM:
INPUT
fig.disp-Input-top02
4. Turn [CURSOR/VALUE] to edit the value.
5. When you've finished editing the value, press [CURSOR/
VALUE].
To save the setting, press [MENU] to access the menu screen,
and choose "Write" (System Write) to execute the Write
operation (System Write: p. 150).
requires phantom power is connected. Supplying phantom power to a
dynamic mic will cause malfunctions. For details on mic specifications,
refer to the owner's manual for the mic you're using.
[VOLUME] knob to "0." If you turn phantom power on/off with the
volume raised, high-volume noise will be produced, possibly damaging
your amp or speakers.
Sent to computer and OUTPUT.
Input
Effect
INPUT
Output to the computer.
Input
Effect
OUTPUT
Computer
OUTPUT
Computer