Roland SonicCell User Manual page 210

Effects List
50: REVERSE DELAY
This is a reverse delay that adds a reversed and delayed
sound to the input sound. A tap delay is connected
immediately after the reverse delay.
fig.MFX-50
L in
Feedback
Rev
Rev. Delay
R in
Parameter Range
Threshold 0–127
Rev Dly Time 0–1300 ms, note
Rev Dly Feedback # -98– +98%
200–8000 Hz,
Rev Dly HF Damp
BYPASS
Rev Dly Pan L64–63R
Rev Dly Level
0–127
Delay 1 – 3 Time 0–1300 ms, note
Delay 3 Feedback # -98– +98%
Delay HF Damp 200–8000 Hz, BYPASS
Delay 1 Pan',
L64–63R
'Delay 2 Pan
Delay 1 Level',
0–127
'Delay 2 Level
Low Gain
-15– +15 dB
High Gain -15– +15 dB
Balance # D100:0W–D0:100W
Level 0–127
210
2-Band
EQ
D1
Delay
D2
D3
2-Band
EQ
Explanation
Volume at which the reverse de-
lay will begin to be applied
Delay time from when sound is
input into the reverse delay until
the delay sound is heard
Proportion of the delay sound
that is to be returned to the input
of the reverse delay (negative
values invert the phase)
Frequency at which the high-fre-
quency content of the reverse-de-
layed sound will be cut (BYPASS:
no cut)
Panning of the reverse delay
sound
Volume of the reverse delay
sound
Delay time from when sound is
input into the tap delay until the
delay sound is heard
Proportion of the delay sound
that is to be returned to the input
of the tap delay (negative values
invert the phase)
Frequency at which the low-fre-
quency content of the tap delay
sound will be cut (BYPASS: no
cut)
Panning of the tap delay sounds
Volume of the tap delay sounds
Amount of boost/cut for the low-
frequency range
Amount of boost/cut for the high-
frequency range
Volume balance of the original
sound (D) and delay sound (W)
Output volume
51: SHUFFLE DELAY
Adds a shuffle to the delay sound, giving the sound a bouncy
delay effect with a swing feel.
fig.MFX-51
L in
Feedback
L out
Delay
R in
R out
Parameter Value
0–2600 ms,
Delay Time #
note
Shuffle
0–100%
Rate #
Acceleration 0–15
Feedback # -98– +98%
200–8000 Hz,
HF Damp
BYPASS
Pan A/B 0–127
Level A/B
0–127
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance #
D0:100W
Level
0–127
Delay A A
B
Delay B
Description
Adjusts the time until the delay sound is
heard.
Adjusts the ratio (as a percentage) of the
time that elapses before Delay B sounds rel-
ative to the time that elapses before the De-
lay A sounds.
When set to 100%, the delay times are
the same.
Adjusts the speed which the Delay Time
changes from the current setting to its speci-
fied new setting.
Adjusts the amount of the delay that's fed
back into the effect. Negative (-) settings in-
vert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don't want to filter out any high frequencies,
set this parameter to BYPASS.
Stereo location of Delay A/B
Volume of delay A/B
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct sound
(D) and the effect sound (W)
Output level
2-Band
L out
EQ
2-Band
R out
EQ