Roland SonicCell User Manual page 133

■ Procedure ....................................................................................................................
1. In the Patch Edit screen, press [EFFECTS].
The [EFFECTS] indicator will light, and the Effect Routing
screen will appear.
■ Menu screens for effect editing......................................................................................
From the Effect Edit screen, you can press [MENU] to
access the Patch Effect menu screen or Rhythm Effect menu
screen.
The Patch Effect menu screen and Rhythm Effect menu
screen are structured as shown at the right.
You can turn [CURSOR/VALUE] to the right or left to switch
between screens.
Press [MENU] once again to return to the previous screen.
Parameter
MFX
(MFX Switch)
CHO
(Chorus Switch)
REV
(Reverb Switch)
MST
(Mastering Effect Switch)
MFX CTRL
(MFX Control)
Write
(Patch/Rhythm Set Write)
System
Utility
Demo Play
SRX Info
(SRX Information)
Version
(Version Information)
Value Explanation
OFF, ON Specifies whether MFX will be used (ON) or not used (OFF).
OFF, ON Specifies whether chorus will be used (ON) or not used (OFF).
OFF, ON Specifies whether Reverb will be used (ON) or not used (OFF).
OFF, ON Specifies whether Mastering Effect will be used (ON) or not used (OFF).
Edits MFX control settings.
Press [CURSOR/VALUE] to access the MFX Control screen (p. 137).
Saves the current patch or rhythm set as user data.
Press [CURSOR/VALUE] to access the Patch Name screen (p. 116) or
Rhythm Set Name screen (p. 131).
Press [CURSOR/VALUE] to access the System screen (p. 176).
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
Using the SonicCell in Patch Mode
2. Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
3. Press [CURSOR/VALUE] to highlight the value.
If a parameter has a "SELECT" indication in the value
field, you can press [CURSOR/VALUE] to access the
setting screen.
4. Turn [CURSOR/VALUE] to edit the value, then press
[CURSOR/VALUE].
5. When you've finished editing, press [EXIT].
The Patch Edit screen will appear.
133