Patch/Tone Output-Related Settings (Patch Output Screen) - Roland SonicCell User Manual

Using the SonicCell in Patch Mode

Patch/Tone output-related settings (Patch Output screen)

Parameter
Pat Out Assign
(Patch Output Assign)
Tone Out (Output) Assign
Tone Out (Output) Level
Cho Send (MFX)
(Tone Chorus Send Level
(Output=MFX))
Rev Send (MFX)
(Tone Reverb Send Level
(Output=MFX))
Cho Send (nonMFX)
(Tone Chorus Send Level
(Output=non MFX))
Rev Send (nonMFX)
(Tone Reverb Send Level
(Output=non MFX))
108
Value Explanation
Specifies how the direct sound of each patch will be output.
MFX:
L+R:
MFX, L+R,
L, R:
L, R, TONE
TONE:
* If you've made settings so that sounds are separately routed to the OUT-
PUT L jack and OUTPUT R jack, but no plug is actually inserted in the OUT-
PUT R jack, the sounds routed to OUTPUT L and OUTPUT R will be mixed
and output from the OUTPUT L jack.
Specifies how the direct sound of each tone will be output.
MFX:
L+R:
L, R:
* If the Pat Out Assign is set to anything other than "TONE," these settings
will be ignored.
MFX, L+R, L, R
* When the Str Type has a setting of Type "2"–"10," the outputs of tones 1
and 2 will be combined with tone 2, and the outputs of tones 3 and 4 will
be combined with tone 4. For this reason, tone 1 will follow the settings.
* If you've made settings so that sounds are separately routed to the OUT-
PUT L jack and OUTPUT R jack, but no plug is actually inserted in the OUT-
PUT R jack, the sounds routed to OUTPUT L and OUTPUT R will be mixed
and output from the OUTPUT L jack.
* Sounds are output to chorus and reverb in mono at all times.
* The output destination of the signal after passing through the chorus is set
with the Output Select (p. 135).
Set the level of the signal that is sent to the output destination specified by
0–127
Tone Out Assign.
Specifies the level of the signal sent to the chorus for each tone if the tone is
0–127
sent through MFX.
Specifies the level of the signal sent to the reverb for each tone if the tone is
0–127
sent through MFX.
Sets the level of the signal sent to chorus for each tone if the tone is not sent
0–127
through MFX.
Sets the level of the signal sent to reverb for each tone if the tone is not sent
0–127
through MFX.
Output in stereo through multi-effects. You can also apply
chorus or reverb to the sound that passes through multi-effects.
Output to the OUTPUT jacks in stereo without passing through
multi-effects.
Output to the OUTPUT L jack or OUTPUT R jack in mono without
passing through multi-effects.
Outputs according to the settings for each tone.
Output in stereo through multi-effects. You can also apply
chorus or reverb to the sound that passes through multi-effects.
Output to the OUTPUT jacks in stereo without passing through
multi-effects.
Output to the OUTPUT L jack or OUTPUT R jack in mono without
passing through multi-effects.