Adjusting The Overall Tone Of The Audio Output (Master Equalizer) - Roland SonicCell User Manual

Adjusting the overall tone of the audio output
(Master Equalizer)
Here's how to make final adjustments to the overall tone of SonicCell's audio output (OUTPUT jacks and PHONS jack).
1. Get the indicators for [MIDI INST], [USB AUDIO], and
[INPUT] to all go out.
The Master EQ screen will appear.
2. Turn [CURSOR/VALUE] to select the parameter that you
want to edit, then press [CURSOR/VALUE].
The value of the selected parameter will be highlighted.
3. Turn [CURSOR/VALUE] to edit the value, then press
[CURSOR/VALUE].
* If the output volume is excessive, the "CLIP" indication will
appear in the upper right of the screen. Adjust the volume
so that distortion does not occur.
Parameter
Frequency
LOW
Gain
Frequency
MID
Gain
Frequency
HIGH
Gain
Q
Total Gain
184
Value
200 Hz, 400 Hz
-15 dB–+15 dB
200–8000 Hz
-15 dB–+15 dB
2000 Hz, 4000 Hz, 8000 Hz
-15 dB–+15 dB
0.5–8.0
-15 dB–+15 dB
4. When you've finished editing, press [MENU] to write the
settings.
5. Choose "Write," and press [CURSOR/VALUE].
The following message will appear.
6. To write the edited settings, choose "OK" and press
[CURSOR/VALUE].
If you decide not to keep the changes you made, select
"CANCEL" and press [CURSOR/VALUE].
Once the settings have been written, you'll be returned to
the Master EQ screen.
Explanation
Specifies the center frequency of the low-frequency range.
Adjusts the volume of the low-frequency range.
Specifies the center frequency of the mid-frequency range.
Adjusts the volume of the mid-frequency range.
Specifies the center frequency of the high-frequency range.
Adjusts the volume of the high-frequency range.
Specifies the width of the mid-frequency range.
Adjusts the overall volume of all frequency bands (low, mid, and
high).