If The Patch Type Is Rhythm Set - Roland SonicCell User Manual

If the patch type is Rhythm Set

If in Patch mode you've set the current patch type to "Rhythm," the following screen will appear.
fig.disp-PatchPlay-r
( 1 ) ( 2 )
( 4 )
( 5 )
( 6 ) ( 7 )
Parameter
(1) Rhythm Set group
(2) Patch type
Patch mode receive
(3)
channel
Rhythm Set
(4)
number/name
(5) Editing key
(6) LIST
(7) EDIT
(8) Preview
( 3 )
( 8 )
Value Explanation
Selects the rhythm set group.
USER:
PRST:
USER, PRST,
GM:
GM, XP-A, XP-B
XP-A, XP-B:
* It is not possible to choose XP-A, XP-B unless a wave expansion board is inserted
in to the corresponding slot.
Patch, Rhythm Specifies whether the current part will use a patch or a rhythm set.
Specifies the channel of MIDI messages that will be received from an external MIDI
1–16
device.
001– Selects the rhythm set.
A0–C8 Within the currently selected rhythm set, selects the key that you'll be editing.
Press [CURSOR/VALUE] to access the Rhythm Set List screen (p. 87).
Press [CURSOR/VALUE] to access the Rhythm Edit screen (p. 118).
If you switch the preview icon ( ) to (
played by that rhythm set.
,
The system Preview setting (p. 179) lets you specify how the preview will be
sounded.
Using the SonicCell in Patch Mode
User
Preset
General MIDI
Wave Expansion Board A, Wave Expansion Board B
), you'll be able to hear a preview sound
83