Output-Related Settings For The Rhythm Set And Rhythm Tones (Rhythm Output Screen) - Roland SonicCell User Manual

Output-related settings for the rhythm set and rhythm tones (Rhythm Output screen)

Parameter
Rhy Out Assign
(Rhythm Output Assign)
Tone Out (Output) Assign
Tone Out Level
(Rhythm Tone Output Level)
Cho Send (MFX)
(Rhythm Tone Chorus Send
Level (Output=MFX))
Rev Send (MFX)
(Rhythm Tone Reverb Send
Level (Output=MFX))
Cho Send (nonMFX)
(Rhythm Tone Chorus Send
Level (Output=non MFX))
Rev Send (nonMFX)
(Tone Reverb Send Level
(Output=non MFX))
Value Explanation
Specifies for each rhythm set how the direct sound will be output.
MFX:
L+R:
MFX, L+R,
L, R:
L, R, TONE
TONE:
* If you've made settings so that sounds are separately routed to the OUT-
PUT L jack and OUTPUT R jack, but no plug is actually inserted in the OUT-
PUT R jack, the sounds routed to OUTPUT L and OUTPUT R will be mixed
and output from the OUTPUT L jack.
Specifies how the direct sound of each tone will be output.
MFX:
L+R:
L, R:
* If the Rhy Out Assign is set to anything other than "TONE," these settings
will be ignored.
MFX, L+R, L, R
* When the Str Type has a setting of Type "2"–"10," the outputs of tones 1
and 2 will be combined with tone 2, and the outputs of tones 3 and 4 will
be combined with tone 4. For this reason, tone 1 will follow the settings.
* If you've made settings so that sounds are separately routed to the OUT-
PUT L jack and OUTPUT R jack, but no plug is actually inserted in the OUT-
PUT R jack, the sounds routed to OUTPUT L and OUTPUT R will be mixed
and output from the OUTPUT L jack.
* Sounds are output to chorus and reverb in mono at all times.
* The output destination of the signal after passing through the chorus is set
with the Output Select (p. 135).
Set the level of the signal that is sent to the output destination specified by
0–127
Tone Out Assign.
Specifies the level of the signal sent to the chorus for each rhythm tone if the
0–127
rhythm tone is sent through MFX.
Specifies the level of the signal sent to the reverb for each rhythm tone if the
0–127
rhythm tone is sent through MFX.
Sets the level of the signal sent to chorus for each rhythm tone if the rhythm
0–127
tone is not sent through MFX.
Sets the level of the signal sent to reverb for each rhythm tone if the rhythm
0–127
tone is not sent through MFX.
Using the SonicCell in Patch Mode
Output in stereo through multi-effects. You can also apply
chorus or reverb to the sound that passes through multi-effects.
Output to the OUTPUT jacks in stereo without passing through
multi-effects.
Output to the OUTPUT L jack or OUTPUT R jack in mono without
passing through multi-effects.
Outputs according to the settings for each tone.
Output in stereo through multi-effects. You can also apply
chorus or reverb to the sound that passes through multi-effects.
Output to the OUTPUT jacks in stereo without passing through
multi-effects.
Output to the OUTPUT L jack or OUTPUT R jack in mono without
passing through multi-effects.
129