Specifying How A Rhythm Tone Will Be Heard (Rhythm Wmt Screen); Pitch-Related Rhythm Tone Settings (Rhythm Pitch/Rhythm Pch Env Screen); Rhythm Pitch Screen - Roland SonicCell User Manual

Using the SonicCell in Patch Mode

Specifying how a rhythm tone will be heard (Rhythm WMT screen)

Parameter
WMT Velo Ctrl
(WMT Velocity Control
Switch)
Velo Fade Lower
(Velocity Fade Width Lower)
Velo (Velocity) Range Lower
Velo (Velocity) Range Upper
Velo Fade Upper
(Velocity Fade Width Upper)

Pitch-related rhythm tone settings (Rhythm Pitch/Rhythm Pch Env screen)

■ Rhythm Pitch screen......................................................................................................

Parameter
Tone Coarse Tune
(Rhythm Tone Coarse Tune)
122
Value Explanation
WMT Velocity Control determines whether a different rhythm tone is played (ON)
OFF, ON, or not (OFF) depending on the force with which the key is played (velocity).
RANDOM When set to "RANDOM," the rhythm set's constituent rhythm tones will sound ran-
domly, regardless of any Velocity messages.
This determines what will happen to the tone's level when the tone is played at a
velocity lower than its specified velocity range. Higher settings produce a more
0–127
gradual change in volume. If you want notes played outside the specified key ve-
locity range to not be sounded at all, set this to "0."
This sets the lowest velocity at which the waveform will sound. Make these settings
1–UPPER when you want different waveforms to sound in response to notes played at differ-
ent strengths.
This sets the highest velocity at which the waveform will sound. Make these settings
when you want different waveforms to sound in response to notes played at differ-
ent strengths.
LOWER–127
If you attempt to set the Lower velocity limit above the Upper, or the Upper below
the Lower, the other value will automatically be adjusted to the same setting.
This determines what will happen to the tone's level when the tone is played at a
velocity greater than its specified velocity range. Higher settings produce a more
0–127
gradual change in volume. If you want notes played outside the specified key ve-
locity range to not be sounded at all, set this to "0."
Level
Fade Lower
Range Lower
Value Explanation
Selects the pitch at which a rhythm tone sounds.
C-1–G9
Set the coarse tuning for Waves comprising the rhythm tones with the
Wave Coarse Tune (p. 121).
You can use your keyboard playing dynamics to control the
four waveforms assigned to the rhythm tone. These settings are
collectively called the "Wave Mix Table (WMT)."
Velocity
Fade Upper
Range Upper