Roland SonicCell User Manual page 146

Input/output and effect settings (In/Out Routing)
■ Procedure ....................................................................................................................
1. Press [INPUT] or [USB AUDIO] so its indicator is lit.
The Input screen or USB Audio screen will appear.
2. Press [EFFECTS] so its indicator is lit.
The In/Out Routing screen will appear.
(Performance mode)
(Patch mode)
■ Menu screens when editing In/Out Routing ...................................................................
If you're in a screen that's related to the In/Out routing,
pressing [MENU] will bring up the Effect Switch screen.
The Effect Switch screen is structured as shown in the
illustration at right. You can switch between screens by
turning [CURSOR/VALUE] to the right or left.
Press [MENU] once again to return to the previous screen.
Parameter
Input Effect
(Input Effect Switch)
Write
(System Write)
System
Utility
Demo Play
SRX Info
(SRX Information)
Version
(Version Information)
146
Value Explanation
OFF, ON Specifies whether input effects will be used (ON) or not used (OFF).
Saves the current settings as system settings (p. 150).
Press [CURSOR/VALUE] to access the System screen (p. 176).
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
3. Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
4. Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
5. Press [CURSOR/VALUE] to highlight the value.
6. Turn [CURSOR/VALUE] to edit the value.
7. When you've finished editing, press [CURSOR/VALUE].
Press [EXIT] or [EFFECTS] to access the In/Out Routing
screen.