Roland SonicCell User Manual page 209

47: 3TAP PAN DELAY
Produces three delay sounds; center, left and right.
fig.MFX-47
L in
Left Tap
Triple Tap Delay
Feedback
Right Tap
R in
Parameter Value
Delay Left/ 0–2600 ms,
Right/Center note
Center
-98– +98%
Feedback #
200–8000 Hz,
HF Damp
BYPASS
Left/Right/
0–127
Center Level
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance #
D0:100W
Level
0–127
48: 4TAP PAN DELAY
This effect has four delays.
fig.MFX-48a
L in
Delay 1
Feedback
Quadruple Tap Delay
Delay 4
R in
fig.MFX-48b
Stereo location of each delay
2 3
1 4
R
L
Parameter Value
0–2600 ms,
Delay 1–4 Time
note
Delay 1 Feed-
-98– +98%
back #
200–8000 Hz,
HF Damp
BYPASS
Delay 1–4 Level 0–127
Low Gain -15– +15 dB
High Gain
-15– +15 dB
D100:0W–
Balance #
D0:100W
Level 0–127
Balance D
2-Band
EQ
Balance W
Center Tap
Balance W
2-Band
EQ
Balance D
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound
that's fed back into the effect. Negative (-)
settings invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Volume of each delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct sound
(D) and the delay sound (W)
Output level
Balance D
L out
Balance W
Delay 2
Delay 3
Balance W
R out
Balance D
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound
that's fed back into the effect. Negative (-)
settings invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Volume of each delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct sound
(D) and the delay sound (W)
Output level
49: MULTI TAP DELAY
This effect provides four delays. Each of the Delay Time
parameters can be set to a note length based on the selected
tempo. You can also set the panning and level of each delay
L out
sound.
fig.MFX-49
L in
Feed
back
R out
R in
Parameter
Delay 1–4 Time
Delay 1 Feed-
back #
HF Damp
Delay 1–4 Pan
Delay 1–4 Level 0–127
Low Gain
High Gain
Balance #
Level
Balance D
Delay 1
Delay 3
Multi Tap Delay
Delay 4
Delay 2
Balance D
Value Description
0–2600 ms, Adjusts the time until Delays 1–4 are
note heard.
Adjusts the amount of the delay sound
-98– +98% that's fed back into the effect. Negative (-)
settings invert the phase.
Adjusts the frequency above which sound
200–8000 Hz, fed back to the effect is filtered out. If you
BYPASS don't want to filter out any the high fre-
quencies, set this parameter to BYPASS.
L64–63R Stereo location of Delays 1–4
Output level of Delays 1–4
-15– +15 dB Gain of the low frequency range
-15– +15 dB Gain of the high frequency range
D100:0W– Volume balance between the direct sound
D0:100W (D) and the effect sound (W)
0–127 Output level
Effects List
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
209