Rhythm Tva Env Screen - Roland SonicCell User Manual

Using the SonicCell in Patch Mode

■ Rhythm TVA Env screen ................................................................................................

Parameter
A-Env T1 V-Sens
(TVA Envelope Time 1 Velocity
Sensitivity)
A-Env T4 V-Sens
(TVA Envelope Time 4 Velocity
Sensitivity)
A-Env Time1–4
(TVA Envelope Time 1–4)
A-Env Level1–3
(TVA Envelope Level 1–3)
128
Value Explanation
This allows keyboard dynamics to affect the Time 1 of the TVA envelope. If
you want Time 1 to be speeded up for strongly played notes, set this param-
-63–+63
eter to a positive (+) value. If you want it to be slowed down, set this to a
negative (-) value.
The parameter to use when you want key release speed to control the Time
4 value of the TVA envelope. If you want Time 4 to be speeded up for quick-
-63–+63
ly released notes, set this parameter to a positive (+) value. If you want it to
be slowed down, set this to a negative (-) value.
Specify the TVA envelope times (Time 1– Time 4). Higher settings will length-
en the time until the next volume level is reached. (For example, Time 2 is
0–127
the time over which Level 1 will change to Level 2.)
Specify the TVA envelope levels (Level 1–Level 3). These settings specify how
the volume will change at each point, relative to the standard volume (the
Tone Level value specified in the TVA screen).
0–127
Level
T1 T2 T3
L3
L1 L2
Note on
T: Time L: Level
T4
Time
Note off