Specifies How Mfx3 Will Be Used (Mfx3 Location Screen); Saving The Mfx3 Settings - Roland SonicCell User Manual

Specifies how MFX3 will be used (MFX3 Location screen)

Parameter
Type

Saving the MFX3 settings

If you've edited the MFX3 effect type or parameter values, those settings will be saved as settings of the currently selected
performance.
To save the settings, from the MFX3 screen, press [MENU] to access the menu screen, and then choose "Write" (Performance Write).
(Performance Write: p. 73)
* In/Out routing settings are saved as system settings. (System Write: p. 150)
Input/output and effect settings (In/Out Routing)
This screen won't appear in Patch mode.
Value Explanation
Specifies how MFX3 will be used.
TG:
Input FX:
TG, Input FX
If this is set to Input FX, you won't be able to use MFX3 on the
performance.
Editing the MFX3 settings
If you've selected the Input FX setting, the In/Out Routing screen will show
"F3." By choosing "F3" you can move to the MFX3 screen and edit the
MFX3 settings. However, this will edit the MFX3 settings of the currently se-
lected performance.
MFX3 will be used as the effect applied to the SonicCell's
tone generator (TG).
MFX1
Tone
MFX2
Generator
(TG)
MFX3
USB
Audio
Input
Effect
INPUT
MFX3 will be connected following the input effect. You'll be
able to use MFX3 on the audio input via INPUT and USB.
MFX1
Tone
MFX2
Generator
(TG)
USB
Audio
Input
Effect
INPUT
MFX3
149