Checking The Installed Wave Expansion Boards - Roland SonicCell User Manual

USER'S GUIDE
Checking the Installed Wave
Expansion Boards
After installation of the Wave Expansion Boards has been completed, check to confirm that the installed
boards are being recognized correctly.
1
Turn on the power, as described in "Turning the Power On" (p. 19 ).
fig.disp-Menu-left-Snd.eps
1 2 Press [MENU].
The Menu screen will appear.
fig.disp-menu-right-info.eps
3 Turn [CURSOR/VALUE] to select "SRX Info."
fig.disp-SysSRXInfo.eps
4
Press [CURSOR/VALUE].
Press or to display System SRX Info screen.
The System screen will appear. Verify that the name of the
installed Wave Expansion Board is displayed.
NOTE
If "- - - - - - - " appears next to the installed slot name, it's possible that the installed Wave Expan-
sion Board is not being recognized correctly. Re-install the Wave Expansion Board correctly.
5
Press [EXIT] to exit the System screen.
48