Rhythm Pch Env Screen - Roland SonicCell User Manual

Parameter
Tone Fine Tune
(Rhythm Tone Fine Tune)
Random Pch Dpth
(Random Pitch Depth)

■ Rhythm Pch Env screen .................................................................................................

Parameter
P-Env Depth
(Pitch Envelope Depth)
P-Env V-Sens
(Pitch Envelope Velocity Sensi-
tivity)
P-Env T1 V-Sens
(Pitch Envelope Time 1 Veloci-
ty Sensitivity)
P-Env T4 V-Sens
(Pitch Envelope Time 4 Veloci-
ty Sensitivity)
P-Env Time 1–4
(Pitch Envelope Time 1–4)
P-Env Level 0–4
(Pitch Envelope Level 0–4)
Value Explanation
Adjusts the pitch of the rhythm tone's sound up or down in 1-cent steps (+/
-50 cents).
* One cent is 1/100th of a semitone.
-50–+50
Set the fine tuning for Waves comprising the rhythm tones with the Wave
Fine Tune (p. 121).
This specifies the width of random pitch deviation that will occur each time
0–9,
a key is pressed. If you do not want the pitch to change randomly, set this
10–90,
100–1200
to "0." These values are in units of cents (1/100th of a semitone).
Value Explanation
Adjusts the effect of the Pitch Envelope. Higher settings will cause the pitch
-12–+12 envelope to produce greater change. Negative (-) settings will invert the
shape of the envelope.
Keyboard playing dynamics can be used to control the depth of the pitch
envelope. If you want the pitch envelope to have more effect for strongly
-63–+63 played notes, set this parameter to a positive (+) value. If you want the pitch
envelope to have less effect for strongly played notes, set this to a negative
(-) value.
This allows keyboard dynamics to affect the Time 1 of the Pitch envelope. If
you want Time 1 to be speeded up for strongly played notes, set this param-
-63–+63
eter to a positive (+) value. If you want it to be slowed down, set this to a
negative (-) value.
Use this parameter when you want key release speed to affect the Time 4
value of the pitch envelope. If you want Time 4 to be speeded up for quickly
-63–+63
released notes, set this parameter to a positive (+) value. If you want it to be
slowed down, set this to a negative (-) value.
Specify the pitch envelope times (Time 1–Time 4). Higher settings will result
in a longer time until the next pitch is reached. (For example, Time 2 is the
time over which the pitch changes from Level 1 to Level 2.)
0–127
Pitch
Specify the pitch envelope levels (Level 0–Level 4). It determines how much
the pitch changes from the reference pitch (the value set with Coarse Tune
-63–+63 or Fine Tune on the Pitch screen) at each point. Positive (+) settings will cause
the pitch to be higher than the standard pitch, and negative (-) settings will
cause it to be lower.
Using the SonicCell in Patch Mode
T1 T2 T3
L0
L1 L3
Note on
L2
T: Time
T4
Time
Note off
L4
L: Level
123