Selecting Patches From A Patch List By Group (Patch List (Grp) Screen) - Roland SonicCell User Manual

Using the SonicCell in Patch Mode

Selecting patches from a patch list by group (Patch List (Grp) screen)

You can choose the patch from a list that's arranged by group, such as USER or expansion board.
* When the power is turned on, the Patch List (Ctg) screen is selected.
1. Display the Patch Play screen.
2. Select "LIST" and press [CURSOR/VALUE].
The Patch List (Ctg) screen will appear.
* If the Patch List (Grp) was displayed last, the Patch List
(Grp) screen will appear. Proceed to step 5.
3. Press [MENU] to access the Category Select screen.
■ Menu screen.................................................................................................................
Parameter
USR, A–G, GM, EXA, EXB
CATEG (Category) LIST
86
From the Patch List (Grp) screen, press [MENU] to access the Group Select screen.
Press [MENU] once again to return to the Patch List (Grp) screen.
Explanation
Changes the group and returns to the patch list by group screen.
USR: User
A–G: Preset A–Preset G
GM:
General MIDI
EXA, EXB: Wave Expansion Board A, Wave Expansion Board B
* It is not possible to choose EXA, EXB unless a wave expansion board is inserted in to the corre-
sponding slot.
Press [CURSOR/VALUE] to access the Patch List (Ctg) screen (p. 85).
* Once you move to the Patch List (Ctg) screen, the Patch List (Ctg) screen will appear when you
select "LIST" in the Patch Play screen.
4. Choose "GROUP LIST" and press [CURSOR/VALUE].
The Patch List (Grp) screen will appear.
fig.disp-PatchL-Grp
5. Turn [CURSOR/VALUE] to select a patch, and press
[CURSOR/VALUE].
The patch will change, and you'll be returned to the Patch
Play screen.