If The Patch Type Is Rhythm Set - Roland SonicCell User Manual

Using the SonicCell in Performance Mode

If the patch type is Rhythm Set

If in Performance mode you've set the current part's patch type to "Rhythm," the following screen will appear.
fig.disp-PartView-r
( 1 ) ( 2 )
( 4 )
( 5 )
(6) ( 7 )
Parameter
(1) Rhythm Set group
(2) Patch type
(3) Current part
Rhythm Set
(4)
number/name
(5) Editing key
(6) LIST
(7) PART
(8) RHY
(9) Preview
64
( 3 )
( 8 ) ( 9 )
Value Explanation
Selects the rhythm set group.
USER:
PRST:
USER, PRST,
GM:
GM, XP-A, XP-B
XP-A, XP-B:
* It is not possible to choose XP-A, XP-B unless a wave expansion board is
inserted in to the corresponding slot.
Patch, Rhythm Specifies whether the current part will use a patch or a rhythm set.
Part1–Part 16 Selects the part (current part) that will be affected by your operations.
001– Selects the rhythm set used by the current part.
A0–C8 Within the currently selected rhythm set, selects the key that you'll be editing.
Press [CURSOR/VALUE] to access the Rhythm Set List screen (p. 67).
Press [CURSOR/VALUE] to access the Part Edit screen (p. 68).
Press [CURSOR/VALUE] to access the edit screen for the rhythm set used by the
current part (p. 117).
If you switch the preview icon ( ) to (
played by that rhythm set.
,
The system Preview setting (p. 179) lets you specify how the preview will be
sounded.
User
Preset
General MIDI
Wave Expansion Board A, Wave Expansion Board B
), you'll be able to hear a preview sound