Adjusting The Release - Roland SonicCell User Manual

Adjusting the Attack
fig.dispTVAEnv.eps
4
Turn [CURSOR/VALUE] to move the cursor to "A-Env Time1."
5
Press [CURSOR/VALUE].
The value will be highlighted.
6
Turn [CURSOR/VALUE] to change the value, then press [CUR-
SOR/VALUE].
When you change the value, the graph in the lower part of the
screen will also change.
If you press [EXIT] you'll return to the previous screen.
fig.disp-TVAEnvT1h1.eps
• To make the sound begin immediately when you press a
key
➝ Set "A-Env Time1" to a low value
fig.disp-TVAEnvT1h2.eps
• To make the sound begin slowly when you press a key
➝ Set "A-Env Time1" to a high value

Adjusting the Release

fig.dispTVAEnvT4.eps
7 Turn [CURSOR/VALUE] to move the cursor to "A-Env Time4."
8
Press [CURSOR/VALUE].
The value will be highlighted.
9
Turn [CURSOR/VALUE] to change the value, then press [CUR-
SOR/VALUE].
When you change the value, the graph in the lower part of the
screen will also change.
If you press [EXIT] you'll return to the previous screen.
fig.disp-TVAEnvT4h1.eps
• To make the sound stop immediately when you release a
key
➝ Set "A-Env Time4" to a low value
fig.disp-TVAEnvT4h2.eps
• To make the sound linger after you release a key
➝ Set "A-Env Time1" to a high value
For details on amp envelope, refer to p. 107 .
MEMO
If you want to save the patch you modified, refer to p. 116 .
Using the SonicCell as a MIDI Sound Module
T1(when you press a key)
T4 (when you release a key)
25