Editing Patches (Patch Edit Screen) - Roland SonicCell User Manual

Using the SonicCell in Patch Mode

Editing patches (Patch Edit screen)

1. Press [MIDI INST].
[MIDI INST] and [PART VIEW] will light, and the Patch
Play screen will appear.
2. Turn [CURSOR/VALUE] to select "PATCH," then press
[CURSOR/VALUE].
The Patch Edit screen will appear.
fig.disp-PatchEdit01
■ Menu screens during patch editing ................................................................................
If you press [MENU] while editing a patch, the menu
screen will appear.
The Menu screen is structured as shown in the
illustration at right. You can switch between screens
by turning [CURSOR/VALUE] to the right or left.
Parameter
Tone Select 1–4
Tone Switch 1–4
Tone Copy
Patch Init
(Patch Initialize)
Write
(Patch Write)
System
Utility
Demo Play
SRX Info
(SRX Information)
Version
(Version Information)
88
Explanation
Changes the current tone (the one targeted for editing), and returns to the previous screen.
Used to specify whether tones 1–4 will be used (ON) or not used (OFF).
Copies the settings of a patch's tone to one of the tones of the currently selected patch.
Press [CURSOR/VALUE] to access the Patch Tone Copy screen (p. 115).
Returns the current patch settings to their initial values (p. 115).
Saves the current patch as user data.
Press [CURSOR/VALUE] to access the Patch Name screen (p. 116).
Press [CURSOR/VALUE] to access the System screen (p. 176).
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
3. Turn [CURSOR/VALUE] to select the item you want to edit,
then press [CURSOR/VALUE].
The editing screen for the selected item will appear.
4. Turn [CURSOR/VALUE] to select the parameter you want
to edit, then press [CURSOR/VALUE].
The value of the selected parameter will be highlighted.
5. Turn [CURSOR/VALUE] to edit the value, then press
[CURSOR/VALUE].