Tape Drive Dimensions And Mounting Hole Locations; Mounting Holes (Bottom View) - Quantum DLT VS80 Product Specification
Quantum dlt vs80: specifications
Hide thumbs
Also See for DLT VS80:
- Installation and operation manual (50 pages) ,
- Quick install manual (14 pages) ,
- Interface manual (182 pages)
Table of Contents
Advertisement
2.2
Tape Drive Dimensions and Mounting Hole
Locations
The internal tape drive provides standard mounting holes. The following sections present the tape
drive dimensions and mounting hole locations.
2.2.1
Mounting Holes (Bottom View)
Figure 4-1 shows the mounting holes and dimensions as viewed from the bottom of the tape drive.
Figure 2-1. Mounting Holes and Dimensions (Bottom View)
001597-01 Rev. A09
May 2004
DLT VS80 Product Specification
2-3
Advertisement
Chapters
Table of Contents
