Management Information; Device Settings - Muratec MFX-1450 Software Manual

Management Information

Device Settings

NOTE
You can always check the device Settings. Whether you can edit the setting, depends on the
"Admin Tools" setting. To edit the setting, see Chapter 4 "Device Settings" on page 4-13.
Checking the device information
1
2
3
Items
Device Name
Installation Location
System Options
Network Connection
Telephone Line Status
Scanner
Printer
Cassette
Options
4
PC_Users_Guide.indb 19
Start OfficeBridge and log in. (see page 2-11)
Click the "Options" tab.
Click [Device Settings] and check the device settings.
The ��evi�e �e����i���s�� di����� �i�� ���e�r�
Descriptions
The device name will be displayed.
The installation location name or the department where
it is used (managed) etc. will be displayed.
The installed options will be displayed.
The current network communications speed and com-
munications method will be displayed.
The current telephone line status will be displayed.
The current scanner status will be displayed.
The current printer status will be displayed.
The current cassette status will be displayed.
The attached optional unit names and their status will
be displayed.
Click [Close] to close the dialog�
M i
anaGeMient nforMation
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
3-19
2007/04/27 10:17:53