Snmp Settings - Muratec MFX-1450 Software Manual

SNMP settings

1
2
Items
Start Service Setting
Agent Identification
4-50 n
etwork
PC_Users_Guide.indb 50
Open the "Admin Tools" screen. (see page 4-4)
Click [SNMP Settings].
The ��NMP �e����i���s�� s�ree� �i�� ���e�r�
Descriptions
Set the SNMP agent service to enable or disable.
"Contact Destination"
Enter the administrator name.
Up to 255 characters can be entered.
"Name"
Enter the machine model name.
Up to 40 characters can be entered.
"Location"
Enter the location where the machine is installed.
Up to 100 characters can be entered.
"Name" and "Location" fields are shared with "Device
Setting" in "Management Information" column. This
means if you change these fields, the fields in Device
Setting will also be changed, and vice versa.
c
onfiGuration
2007/04/27 10:18:05