Muratec MFX-1450 Software Manual page 149

Items
IP Address Filtering
Unacceptable Port No.
[Initialize]
3
PC_Users_Guide.indb 53
Descriptions
"Enable"
Select whether to enable the setting you have config-
ured. Check this box to enable the setting.
NOTE
• When this is disabled, the settings are invalid even if
they are set.
• To enter the filtering address:
(1) Click the "Accept" or "Refuse" radio button.
(2) Enter the IP Address to accept or refuse.
(3) Click [Add].
• To delete the filtering address:
(1) Select the address in the list.
(2) Click [Delete].
NOTE
• The "Accept" or "Refuse" setting is effective for all the
address registered in the list.
"Enable"
Select whether to enable the setting you have config-
ured. Check this box to enable the setting.
NOTE
• When this is disabled, the settings are invalid even if
they are set.
• To enter the unacceptable Port No.:
(1) Enter the Port No. you will not accept.
(2) Click [Add].
• To delete the unacceptable Port No.:
(1) Select the Port No. in the list.
(2) Click [Delete].
Initialize the Network Filtering settings. The settings
will return to the factory default setting.
When you are finished, click [Save] to save the settings.
You can specify the last three digits of the address
in range.
n
etwork
c 4-53
onfiGuration
2007/04/27
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
10:18:06