Security Printing - Muratec MFX-1450 Software Manual

Security Printing

Using this function, documents will not be printed until you press the [Print] key
on the machine. This feature allows users to restrict document access to authorized
users only.
NOTE
In order to use security printing, you must be a registered OfficeBridge user. Con-
tact your System Administrator, if necessary.
The following steps describe the typical process when printing documents out of
Windows-based applications. The exact process may vary depending on the applica-
tion you are using.
1
2
3
4
5
6
7
PC_Users_Guide.indb 3
Verify that your machine is properly connected to the computer, the power has
been turned on and the cassette is full of paper.
Verify that you have installed the print driver on your computer.
Start the desired application program and create/open a document.
Click [Print] or [Print Setup] from the File menu.
Make sure that "Muratec MFX-2050/F-565" or "Muratec MFX-1450/F-525" is
selected as the printer.
Click [Properties] or [Setup] to open the printer property.
Click the "Options" tab, and check the "Security Print" to "On".
Click [OK].
P
rintinG docuMentS froM your
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Pc 2-3
2007/04/27 10:17:43