Muratec Ob Scan To Print Monitor; Environment Settings - Muratec MFX-1450 Software Manual

Muratec OB Scan to Print Monitor

NOTE
To use "Muratec OB Scan to Print Monitor", it is necessary to install this program
on your computer. See "Installing OfficeBridge on your PC" on page 1-10 for instal-
lation instructions.

Environment settings

Opening the environment setting
If you want to adjust settings, open "Environment settings" by the following proce-
dure:
1
Folder Settings
Creating a new folder
NOTE
Create a shared folder on your Computer in advance. This folder should not be the
same folder that has been registered in "Folder Shortcut Registration", but a folder
dedicated to "Scan to Printer Monitor".
1
2
3
PC_Users_Guide.indb 17
Double-click the Muratec OB Scan to Print Monitor icon
The icon will appear when Muratec OB Scan to Print Monitor is activating.
See "Opening the environment setting" on page 5-17 and open the setting
screen.
Click the "Folder" Tab.
Select a "Not used" indication and click "Register/Edit...".
M ob S P
uratec can to
on the task tray.
M 5-17
rint onitor
2007/04/27
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
10:18:11