Network Filtering - Muratec MFX-1450 Software Manual

Network Filtering

1
2
Items
MAC Address Filtering "Enable"
4-52 n
etwork
PC_Users_Guide.indb 52
Open the "Admin Tools" screen. (see page 4-4)
Click [Network Filtering].
The �Ne����rk Fi���eri����� s�ree� �i�� ���e�r�
Descriptions
Select whether to enable the setting you have config-
ured. Check this box to enable the setting.
NOTE
• When this is disabled, the settings are invalid even if
they are set.
• To enter the filtering address:
(1) Click the "Accept" or "Refuse" radio button.
(2) Enter the MAC Address to accept or refuse.
(3) Click [Add].
• To delete the filtering address:
(1) Select the address in the list.
(2) Click [Delete].
NOTE
• The "Accept" or "Refuse" setting is effective for all the
address registered in the list.
c
onfiGuration
2007/04/27 10:18:05