Muratec MFX-1450 Software Manual page 151

Items
Fax Settings F-Code Box
PC_Users_Guide.indb 55
Descriptions
To create a new box, select a new number. To
edit a box select the box to edit. Enter the fol-
lowings and click [Save]:
• Box Type
• Box Name
• Sub-Address
• Password
• Hold time
• Rx Protect
• Auto Print
• Over Write
• Erase Tx Doc
• I.D. Code
Redial Attempts Select how many times to redial.
Redial Interval Select the redial interval.
Block Junk Fax Select the setting from OFF, Mode 1, Mode 2 or
Mode 3.
When you have selected Mode 2 or Mode 3,
enter the "Block Number" and click [Add]. To
delete registered block numbers, select the
numbers and click [Delete].
Click [Save] to save the settings.
Number of Rings Select the number of rings before receiving a
fax in Fax or Tel/Fax reception mode.
Dialing Pause Select how long the machine should pause
when a pause is inserted.
S-Fine Resolution Select the super fine resolution from 400 dpi
and 600 dpi.
Rx Reduction Rate Select the reduction rate for received faxes
from Auto (automatic reduction) or 100% (no
reduction).
Reduction Margin Enter the margin for received faxes.
Paper Savings Select whether to enable duplex reception or
half-page reception to save paper.
Quick Memory Tx Check the box to activate the function.
ECM Mode Check the box to activate the function.
Service Mode Check the box to activate the function.
Prefix Enter the prefix number. To enter a pause or
tone, use the button placed under the column.
Receive Time Stamp Check the box to activate the function.
n c
etwork onfiGuration
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
4-55
2007/04/27 10:18:06