Ip Address - Muratec MFX-1450 Software Manual

IP Address

Assigning an IP address to your machine enables network communication and
machine access via your web browser.
NOTE
If your server is DHCP compliant, the IP address will be assigned automatically
and it cannot be edited. If the DHCP server is not installed on your network, you
can assign an IP address manually as described below.
To assign an IP address manually:
1
2
3
4
5
6
1-8 tcP/iP
PC_Users_Guide.indb 8
Open the TCP/IP setting menu display. (see page 1-5)
Press [DHCP Setting], then press [OFF] and [Enter].
Press [IP Address].
Enter the appropriate IP address using the numeric keys.
Press the arrow keys to navigate the IP address fields. To delete a number,
press the [Clear] button.
Press [Enter]. The display returns to the TCP/IP setting menu.
You may configure additional settings.
To return to the Standby mode, press [Reset].
After you have registered the network settings, please reboot the machine. To
reboot the machine, press [OB Shutdown] and turn the machine "Off" and after
three or more seconds, turn the machine back "On".
SettinGS
2007/04/27 10:17:40