Using Muratec Ob Scan To Print Monitor - Muratec MFX-1450 Software Manual

Network Settings
1
2
Item
IP address
HTTP Port No.
Client Port No.
3

Using Muratec OB Scan to Print Monitor

This function can be accessed from the machine control panel,
Chapter 6, "Scanner Functions" in the MFP User's Guide.
5-20 M
uratec
PC_Users_Guide.indb 20
See "Opening the environment setting" on page 5-17 and open the setting
screen.
Click the "Network" Tab.
Description
Click [Search] to search the IP address of your machine.
When the IP addresses are displayed, select the IP
address of your machine and click [OK].
NOTE
• On Windows XP Service Pack 2, Windows Server 2003
or Windows Vista, "Windows Security Alert dialog" will
be displayed. In such case, click [Unblock].
Enter the HTTP port number specified in the "TCP/IP
Settings" dialog box of "OfficeBridge".
Normally this will be set to "80".
Enter the "Scan to Print Monitor" port number specified
in the "TCP/IP Settings" dialog box of "OfficeBridge".
The default setting is "62000".
NOTE
The port number specified here must correspond to
•
the "Scan to Print Monitor Port No." in the "TCP/IP
Settings" dialog box of "OfficeBridge". Once you have
changed the "Scan to Print Monitor Port No." in the
"TCP/IP Settings" dialog box, be sure to change the
above setting accordingly.
Adjust any document settings, and click "OK" to save the setting.
ob S P M
can to rint onitor
]
see "Scan to printer" in
2007/04/27 10:18:12