Entering Destinations - Muratec MFX-1450 Software Manual

4
5
6
NOTE
When you have installed and set up the "Muratec OB InfoMonitor" on your PC, you
can be notified of the transmission status automatically. See page 5-3, how to set it
up.

Entering destinations

Entering the destinations directly
1
2
3
4
5
6
7
2-14 u
SinG
PC_Users_Guide.indb 14
Specify the destinations.
• To enter them directly, see below.
• To select them from the Address Book, see page 2-15.
• To locate them using an LDAP search, see page 2-17.
Adjust any settings.
• To adjust settings, see "Setting transmission functions" on page 2-20.
Click [Send].
To review or cancel the selected documents, see "Reviewing or canceling desti-
nations" on page 2-19.
Enter the fax number in the "Fax Destination" box.
Click [Add].
Repeat steps 1 and 2 until you have entered all of the fax destinations.
Enter the e-mail address in the "E-mail Destination" box.
Click [Add].
Repeat steps 4 and 5 until you have entered all of the destinations.
You may change the recipient status to "To" to "Cc" or "Bcc" from the drop-down
list.
To review the entered destinations, click the drop-down list to the right of the
[Add] button.
o b
ffice ridGe functionS
2007/04/27 10:17:45