Connecting The Lan Cable - Muratec MFX-1450 Software Manual

Connecting the LAN cable

In order to use the network features you must connect your machine to your LAN
and adjust the appropriate settings.
To connect the machine to your LAN, a 10BASE-T or 100BASE-TX LAN cable (Cat-
egory 5) is required.
NOTE
The LAN cable is not included with this product.
1
2
3
4
1-4 c
onnectinG the
PC_Users_Guide.indb 4
Turn your machine off and unplug the power cord.
Plug one end of the LAN cable into the LAN connector on the left side of the
machine.
LINK lamp:
Illuminates when connected to the LAN.
LAN Connector
ACTIVITY lamp:
Blinks when there is data traffic
on the LAN.
Connect to the Ethernet hub.
Plug the other end of the LAN cable into the 10Base-T/100Base-TX Ethernet
hub.
Plug the power cord into the wall outlet and turn your machine on.
Lan
cabLe
PHO NE1
PHO NE2
LIN E
LAN cable:
10Base-T/100Base-TX cable
RJ-45 connector
2007/04/27 10:17:39