Sending A Pc Fax; Installing The Driver - Muratec MFX-1450 Software Manual

Sending a PC fax

You can send a document from a PC application to a remote fax machine or e-mail
location. This process allows you to save time and reduce the paper consumption in
your office.

Installing the driver

In order to perform a PC fax, you should have the applicable fax driver installed on
your PC. The driver is located on the CD supplied with your machine. See "Install-
ing OfficeBridge on your PC" on page 1-10 for installation instructions.

Sending a PC fax

After the OfficeBridge driver is installed on your PC, you can send a document
directly from your PC to a remote fax machine or e-mail inbox.
The following steps provide the basic procedure for sending a PC fax.
1
2
3
4
5
6
NOTE
You can also store the document in temporary storage and send it at a later time. In
this case, select "Temporary Storage". See page 2-35 for instructions on sending a
document from temporary storage.
PC_Users_Guide.indb 5
Verify that your machine is properly connected to the computer and the power
has been turned on.
Verify that you have installed the fax driver on your computer.
Start the desired application program and create/open a document.
Click [Print] from the File menu.
Make sure that "Muratec MFX-2050/F-565 Fax" or "Muratec MFX-1450/F-525
Fax" is selected as the printer.
If you want to make any adjustments, click [Properties]. For details, see "Paper
Preferences" on page 2-6.
Click [Print].
The ����u�e��� ��er���i���� di����� �i�� ���e�r� ����u�e��� ��er���i���� di����� �i�� ���e�r�
When you are not logged in to OfficeBridge, select your user name and enter
your password, and click [Send].
When you are logged in to OfficeBridge, click [Send].
S Pc 2-5
endinG a fax
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2007/04/27 10:17:43