Management Information
Device Settings
Registering device information
Registers specific device information to distinguish machines when multiple units
have been installed.
1
Log-in to OfficeBridge.
NOTE: If the administrator is registered, you should log-in as an administrator to edit
this setting.
2
Click [Device Settings] on the "Admin Tools" tab.
The "Device Settings" screen will appear.
Item
"Device Name"
"Installation Location"
"System Options"
"Network Connection"
"Telephone Line
Status"
Description
Enter the name of the main unit in order to identify the
device. The name may contain up to 40 characters.
Enter the location where the main unit is installed, the
department where it is used (managed), etc.
The location may contain up to 100 characters.
You may add options that have been installed, the con-
figuration of these devices, etc.
This may contain up to 200 characters.
The current network communications speed and com-
munications method are displayed.
The current telephone line status is displayed.
Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
3-29