Muratec Ob Tiffmaker; Creating A Tiff File - Muratec MFX-1450 Software Manual

Muratec OB TiffMaker

NOTE
To use "Muratec OB TIFFMaker", it is necessary to install this program on your
computer. See "Installing OfficeBridge on your PC" on page 1-10 for installation
instructions.

Creating a TIFF file

1
2
3
4
5
NOTE
By default, TIFFMaker will append the extension ".tif" and place the file into the
PRINT folder under Muratec\OfficeBridge\TiffMaker\Print folder.
PC_Users_Guide.indb 27
Start the desired application program and create/open a document.
Select "Print" from the File menu.
Click [Print] or [Print Setup] from the File menu.
Make sure that "Muratec OB TIFFMaker" is selected as the printer.
If you want to make any adjustments, click [Properties] or [Setup]. For details,
refer to the Help screen.
Click [OK] or [Print].
TIFFMaker will ask you where to place the created TIFF file.
Select the desired location and enter the file name, then click [Save].
M ob t M
uratec iff aker
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
5-27
2007/04/27 10:18:14