How To Read This Manual; Key Descriptions - Muratec MFX-1450 Software Manual

How to read this manual

Symbols
In this manual, the following symbols are used with the items where important
operational and safety information must be observed.
For safe operation, please carefully read the "Safety Information" supplied with this
product.
IMPORTANT
NOTE
The following terms, symbols and abbreviations are used on this manual.

Key descriptions

In this manual, the operating keys are described as follows:
The key names on the control panel are shown in < >, and the key names on the
touch panel are in [ ].
Keys on the control panel
Touch panel keys
PC_Users_Guide.indb 5
Describes warnings to protect yourself and others from
serious or potentially fatal injury if you handle the
machine incorrectly. For safe operation, please follow
instructions carefully.
Describes cautions to protect yourself and others from
personal injury or damage to properties if you handle
the machine incorrectly. For safe operation, please
follow instructions carefully.
Describes important conditions or restrictions you
should carefully observe to avoid problems caused by
incorrect operations.
Describes reference information and additional notes
for operations.
Document: Original(s) that you are copying, faxing or scanning.
Paper: Paper to be printed on.
Tx: Denotes sending.
Rx: Denotes receiving.
, : Shows the direction of the document.
, : Shows the direction of the paper.

Enclosed in < >, for example, <Setting>.

Enclosed in [ ], for example, [Enter].
2007/04/27 10:17:34