Windows Operation Errors - Muratec MFX-1450 Software Manual

Windows Operation errors

Phenomenon Device to check
Cannot PC
connect to
OfficeBridge.
Machine
Network
peripheral
devices (ex.
LAN hub,
router)
6-2 w
indowS
PC_Users_Guide.indb 2
Check point
Check if the OfficeBridge IP
address is entered correctly.
Check if the OfficeBridge
network settings are correct.
Check if the browser set-
tings are correct.
Check if the LAN cable is
connected.
Check if the LAN cable is
damaged.
Check if the network card
(LAN card) is damaged.
Check to make sure that the
system memory is sufficient.
Check if the user informa-
tion is registered.
Check if the correct pass-
word is entered.
Check if the power is ON.
Check if the LAN cable is
connected.
Check if the LAN cable is
damaged.
Check if the network set-
tings are correct.
Check if the power is ON.
Check if the LAN cable is
connected.
Check if the LAN cable is
damaged.
Check if the network periph-
eral device is damaged.
Check if the network set-
tings are correct.
o
Peration errorS
Countermeasure
Check the OfficeBridge IP address and
make sure it has been entered correctly.
Refer to Chapter 1 "TCP/IP settings" on
page 1-5 and configure the network set-
tings correctly.
Check the browser settings by following
these steps:
· Go to "Tools" on the menu bar −
"Internet Options" − "Connections" tab
− "Local Area Network (LAN) settings
Explorer", and press the [LAN Settings]
button to check the proxy server set-
tings.
Check the LAN cable connection and con-
nect correctly.
Replace the LAN cable.
Replace the network card.
· Make sure you have the required
memory space available on your PC. If
not, please add memory.
· If multiple software applications or
unnecessary resident software are run-
ning, exit them.
Register the user information in the "User
Set-up" dialog box of OfficeBridge.
Enter the password registered in the
"User Set-up" dialog box of OfficeBridge.
Turn ON the power.
Check the LAN cable connection and con-
nect correctly.
Replace the LAN cable.
Configure the network settings cor-
rectly (refer to page 1-5).
Turn ON the power.
Check the LAN cable connection and con-
nect correctly.
Replace the LAN cable.
Connect the LAN cable to another port on the
device and make sure it operates correctly. If
it fails to operate, please replace the device.
Refer to the operational manual of the
device and configure the network settings
correctly.
2007/04/27 10:18:14